• reverse osmosis

    Industrial and Commercial Reverse Osmosis (RO) Systems

    High Purity Water Production

    Water Tech Reverse Osmosis (RO) systems use proven sediment pre-treatment and membrane technology to produce highly purified water for potable, food-beverage, industrial and other uses.

    Reverse osmosis (RO) is a proven, dependable technology that works by forcing water through a semi-permeable membrane to separate clean water at the molecular level from the majority of impurities. Impurities including sodium, calcium, chloride, silica, sulfates, cysts, bacteria, viruses, and heavy metals commonly measured as total dissolved solids (TDS) are typically reduced by 99%.

    Water Tech RO systems are available in a range of sizes and configurations from 1 - 120 GPM.

    Standard Features Include:

    • Powder coated steel frame
    • FRP multi-port pressure vessels
    • Pre-filter housing and cartridges
    • Vertical multi-stage centrifugal pump
    • Automatic Inlet Valve
    • Low-pressure shut-off with auto restart
    • Tank level input
    • Adjustable recycle line
    • Pressure gauges
    • Flow meters
    • Product check valve
    • Product sample valves

    Additional Options Include:

    • Electronic controller with product water conductivity meter and alarm output
    • Programmable concentrate auto flush.

    Please refer to our technical datasheets, or contact us for additional information.

    Read more

  • ionex

    Softener & Ion Exchange Systems

    Calcium Hardness - Scale Control, Demineralization

    Water Tech Reverse Osmosis (RO) systems use proven sediment pre-treatment and membrane technology to produce highly purified water for potable, food-beverage, industrial and other uses.

    Water Tech water softeners and ion exchange systems are available in all sizes. Our pre-engineered, pre-plumbed, skid mounted water softeners with Fleck brass control valves are ideal for commercial and industrial applications where high flow and high capacities are required and system footprint needs to be flexible. Each system comes with resin tanks, ion exchange resin media, control valves, meters, and brine tanks. Water Tech systems can be designed in multiples and installed in parallel for duplex, triplex and quad systems.

    Features and Benefits Include:

    • Parallel systems available with flow demand staging
    • Available with 2" or 3" control valves
    • Capacities to 1,050,000 grains per tank
    • Flow rates to 1,120 GPM per system
    • Corrosion resistant FRP resin tanks
    • Corrosion resistant polyethylene brine tanks

    Please refer to our technical datasheets, or contact us for additional information.

    Read more

  • Water filtration system Water Treatment Plant

    Media Filtration Systems

    For Multi-Media, Carbon, Filox, Micro Z

    Water Tech Reverse Osmosis (RO) systems use proven sediment pre-treatment and membrane technology to produce highly purified water for potable, food-beverage, industrial and other uses.

    Water Tech offers a complete line of media filtration systems and equipment for a wide variety of applications. Our Micro Z media offers superior performance, reducing particulate matter down as low as 3 micron with 2.5 times the dirt holding capacity of sand. Our Filox media for iron, manganese, and hydrogen sulfide reduction has the highest flow rate in the market today. Our Activated Carbon, Calcite, and other filter systems are designed to meet industrial and muncipial water treatment needs.

    Features and Benefits Include:

    • Automatic backwash and regeneration
    • Corrosion resistant FRP tanks
    • Pre-programmed regeneration options
    • User friendly control valves
    • Vortech tanks to improve media contact

     

    Custom engineered systems are also available in all sizes.

    Please refer to our technical datasheets, or contact us for additional information.

    Read more

  • uv systems

    Ultraviolet (UV) SYSTEMS

    Inactivate Harmful Organisms

    Water Tech Ultraviolet (UV) light water treatment disinfection technologies such as Smart Stream. UV sterilization is a simple and rapid physical process where water containing harmful organisms is exposed to UV light. The UV light quickly inactivates the microorganisms by destroying their ability to multiply and infect, inactivating up to 99.9999% (6-Log) of harmful organisms.

    Highly Effective in Inactivating Cysts, Bacteria, Viruses, and Parasites:

    • Chlorine Resistant Protozoa Cysts - Cryptosporidium, Giardia lamblia
    • Bacteria - Cholera, E. Coli, Legionella, Pneumophila, Salmonella
    • Viruses - Hepatitis A, Polio, Rota
    • Parasites

    Environmentally Friendly:

    • No toxic chemicals required
    • No creation of harmful disinfection by-products

    Benefits and Features Include:

    • Minimal maintenance
    • Lamp rated for 12 month continuous service
    • Highly polished stainless steel reactor chamber
    • Audible and visual alarm indicates lamp failure
    • Auto lamp reduces energy during no-flow

    Please refer to our technical datasheets, or contact us for additional information.

    Read more

  • DI system

    Adjustable Deionization Systems (DI)

    High Recovery, Adjustable TDS Removal

    Water Tech supplies Voltea CapDI© Capacitive Deionization (DI) tunable total dissolved salt (TDS) removal of 25 - 95% and up to 95% recovery at less than 0.5 kWh/m3, with no chemical costs.

    Voltea CapDI is a tunable water deionization technology designed to remove dissolved salts from water sources ranging from tap water, brackish groundwater, to industrial process water. CapDI achieves this at lower cost and reduced environmental impact than any other available technology.

    Scalable

    Voltea CapDI systems are modular, allowing easy expansion to meet any increased water demands.

    Adjustable - Tunable

    Voltea CapDI is tunable, allowing adjustable TDS reduction between 25 - 95% depending on customer needs, eliminating the requirement for blending to achieve a specific water quality. The customer sets their desired reduction rate and CapDI maintains this level, continually adjusting itself to account for any fluctuations in feed water characteristics.

    Applications Include:

    • Wastewater Reuse
    • Cooling Towers - Scale control with no chemicals
    • Industrial Laundries - Prevents dull gray linens
    • Agriculture - Removes damaging sodium from seawater intrusion

    Please refer to our technical datasheets, or contact us for additional information.

    Read more

  • tequaticskidf150

    Tequatic Plus

    Ultra-High TSS, Solids Filters

    Our DOW TEQUATIC™ PLUS Filters are continuous cleaning, cross-flow filters with forced settling and solids collection in one device. These filters remove total suspended solids (TSS) of 100 - 10,000+ mg/L from difficult water streams, and can filter down to 15 microns, even in the presence of fats, oils, grease and other contaminants.

    TEQUATIC™ PLUS Filters require no backwashing, minimal filter changes, and low (or no) chemicals, to provide high water recovery, reuse water, and reduced surcharge and water costs.

    TEQUATIC™ PLUS Filters are supplied on pre-engineered skids and are effective as a pre-filter, primary filter or final filter, or as an alternative to dissolved air flotation.

    Please refer to our technical datasheets, or contact us for additional information.

    Read more

  • grease oil

    Automatic Grease and Oil Removal Units

    Automatic Grease Collection and Removal

    Water Tech grease and oil removal systems solve tough drain-water problems by automatically removing and recovering up to 98.6% of the grease, oils, fats, and incidental food solids from kitchen and food processing flows. Our Big Dipper units help prevent drain line clogging, protect septic and treatment facilities, eliminate grease trap pumping costs, and eliminate the cost of large in-ground grease traps or interceptors.

    The systems are automatic and self-cleaning. As greasy effluent drains from commercial kitchen fixtures, the unit traps the grease and oils and incidental food solids. The food solids collect in a strainer basket for removal, and the grease and oils separate from the effluent and rise to the surface of a built-in stainless steel tank. The unit automatically skims and transfers the trapped grease and oils at least once per day to a removable collection container, controlled by a timer that activates the skimming wheel at the proper time. Clean water exits the unit and flows into the facility drain lines.

    Water Tech non-sulfate reducing bacteria eliminate hydrogen sulfide (H2S) gas and mal-odors common in septic anoxic and anaerobic wastewater conditions.

    Central Units are available to efficiently service multiple fixtures from a central location, and Automatic Solids Transfer (AST) units automatically remove the trapped incidental solids with a water-driven eductor.

    Units are available with capacities of 20 - 125 GPM.

     

    Benefits Include:

    • Remove effluent fat, oil, grease
    • Prevent clogged drain lines
    • Protect treatment plants
    • Self-cleaning
    • Eliminate messy grease traps

    Applications include:

    • Hospitals
    • Hotels, resorts
    • Protect treatment plants
    • Correctional facilities
    • Casinos
    • Food processing plants
    grease 3

    Please refer to our technical datasheets, or contact us for additional information.

    Read more